How To Make a Vine
I made mine with 4 layers of fleece, you can use 3 if you'd like. Don't use too many layers as your machine may not be able to sew through them all. I cut mine 6" wide by 30" long. You can adjust the length to fit your cage.
![Picture](/uploads/1/9/0/6/19062649/7042673.jpg)
Cut strips and a tab (you can put a tab at both ends to hang as a swag).
![Picture](/uploads/1/9/0/6/19062649/3101051.jpg)
Place the layers on top of each other.
![Picture](/uploads/1/9/0/6/19062649/340957.jpg)
Place the tab between the layers in the center of the strips.
![Picture](/uploads/1/9/0/6/19062649/4255568.jpg)
Sew a straight stitch the entire length.
![Picture](/uploads/1/9/0/6/19062649/7298123.jpg)
Cut fringe on one side making sure you just to up to the seam. If you cut the seam it will ruin the vine.
![Picture](/uploads/1/9/0/6/19062649/5794231.jpg)
Cut the fringe in approximately 1/2" strips.
![Picture](/uploads/1/9/0/6/19062649/5308951.jpg)
Cut fringe on both sides of the seam.
![Picture](/uploads/1/9/0/6/19062649/8564218.jpg)
Fluff the vine and hang in cage.