Glide-arium™ Mesh Enclosures .....since 2010
Why settle for an imitation when you can order an original Glide-arium™?
*Please be aware that there are fraudulent reproductions of the Glide-arium™ Mesh Enclosures. If you have not ordered it directly from Glider Nursery, it is NOT an official Glide-arium™ cage and Glider Nursery cannot warranty imitations. Permission has not been given to anyone to reproduce any size or style of my Glide-arium™ mesh enclosure cages.
2022
*Please be aware that there are fraudulent reproductions of the Glide-arium™ Mesh Enclosures. If you have not ordered it directly from Glider Nursery, it is NOT an official Glide-arium™ cage and Glider Nursery cannot warranty imitations. Permission has not been given to anyone to reproduce any size or style of my Glide-arium™ mesh enclosure cages.
2022
Glide-ariums™ mesh enclosures are a permanent cage alternative for your sugar gliders. They also make excellent travel cages because of the ease of tear down and set-up. They can be conveniently transported in a travel carry-all by Fast Track.
Glide-arium™ cages are made of sturdy vinyl coated polyester and are available in a variety of colors. Glide-arium™ mesh enclosures and frames are made to order, so please allow 3-6 weeks for delivery. If you need your Glide-arium™ mesh enclosure by a specific date, please contact me prior to placing the order to ensure I am able to meet your requirements.
You can order the combo (Glide-arium™ mesh enclosure & frame) or just the Glide-arium™ mesh enclosure. These do not stretch like the old style screens. Existing frames may need to be trimmed as I have found that all frames are not identical. It is recommended to order frames at the same time to ensure a quality fit.
Each frame made by Glider Nursery is tested to ensure a quality fit to your Glide-arium™ mesh enclosure prior to shipping. A rubber mallet is used to obtain a snug fit between the pipe and the connectors. DO NOT force the mesh onto the frame. Doing so will result in ripped seams as this material does not stretch or give. If the mesh does not go onto the frame, the frame was not assembled properly.
To clean your Glide-arium™ mesh enclosure, it is recommended to rinse out the larger screens in the shower with warm water. Smaller screens may fit in the *washing machine, on gentle cycle, mild soap, and cold water. Do not bleach, do not place into the dryer. A mild 10% mixture of vinegar and water may be used.
*Disclaimer: Based on the differences and ages of washing machines, it is possible that the Glide-arium™ mesh enclosure, like any other garment, could become entangled in the agitator and potentially become damaged. Glider Nursery cannot warranty your product if damaged in a washing machine.
To hang cage accessories in your new Glide-arium™ mesh enclosure, you must have either stainless steel eyes, fleece pole covers or large links. Do not hang or attach anything to the mesh; doing so will damage your Glide-arium™ mesh enclosure. (See photos below for hanging.)
Glide-arium™ cages are made of sturdy vinyl coated polyester and are available in a variety of colors. Glide-arium™ mesh enclosures and frames are made to order, so please allow 3-6 weeks for delivery. If you need your Glide-arium™ mesh enclosure by a specific date, please contact me prior to placing the order to ensure I am able to meet your requirements.
You can order the combo (Glide-arium™ mesh enclosure & frame) or just the Glide-arium™ mesh enclosure. These do not stretch like the old style screens. Existing frames may need to be trimmed as I have found that all frames are not identical. It is recommended to order frames at the same time to ensure a quality fit.
Each frame made by Glider Nursery is tested to ensure a quality fit to your Glide-arium™ mesh enclosure prior to shipping. A rubber mallet is used to obtain a snug fit between the pipe and the connectors. DO NOT force the mesh onto the frame. Doing so will result in ripped seams as this material does not stretch or give. If the mesh does not go onto the frame, the frame was not assembled properly.
To clean your Glide-arium™ mesh enclosure, it is recommended to rinse out the larger screens in the shower with warm water. Smaller screens may fit in the *washing machine, on gentle cycle, mild soap, and cold water. Do not bleach, do not place into the dryer. A mild 10% mixture of vinegar and water may be used.
*Disclaimer: Based on the differences and ages of washing machines, it is possible that the Glide-arium™ mesh enclosure, like any other garment, could become entangled in the agitator and potentially become damaged. Glider Nursery cannot warranty your product if damaged in a washing machine.
To hang cage accessories in your new Glide-arium™ mesh enclosure, you must have either stainless steel eyes, fleece pole covers or large links. Do not hang or attach anything to the mesh; doing so will damage your Glide-arium™ mesh enclosure. (See photos below for hanging.)
Standard sizes and uses are as follows:
Travel Carriers (click on the like to be taken to the order page)
Cube (14" x 14" x 14") - hospital/rejected joey - NOT for overnight/extended use
The "ER" (16.5" x 16.5" x 30") - hospital/rejected joey
Cottage (18" x 30" x 36") - pair/travel
Villa (30" x 30" x 48") - pair/trio/quad
Chateau (30" x 30" x 70") - pair up to a large colony
(All measurements are approximate.)
The Cube and "ER" are strictly for a small hospital or rejected joey cage, they are not to be used as a permanent or overnight cage. All other sizes are used for permanent/travel cages for pairs; the Villa and Chateau are suitable for trios, and quads. The more gliders in the enclosure, the larger sizes are needed. Many owners choose to have larger cages for their gliders, several have the Chateau for a pair. Bigger is better! The choice is yours! Authorized by Nancy1202
Travel Carriers (click on the like to be taken to the order page)
Cube (14" x 14" x 14") - hospital/rejected joey - NOT for overnight/extended use
The "ER" (16.5" x 16.5" x 30") - hospital/rejected joey
Cottage (18" x 30" x 36") - pair/travel
Villa (30" x 30" x 48") - pair/trio/quad
Chateau (30" x 30" x 70") - pair up to a large colony
(All measurements are approximate.)
The Cube and "ER" are strictly for a small hospital or rejected joey cage, they are not to be used as a permanent or overnight cage. All other sizes are used for permanent/travel cages for pairs; the Villa and Chateau are suitable for trios, and quads. The more gliders in the enclosure, the larger sizes are needed. Many owners choose to have larger cages for their gliders, several have the Chateau for a pair. Bigger is better! The choice is yours! Authorized by Nancy1202
Combo: Glide-arium™ Mesh Enclosure & Frame
Quality PVC frames with your custom Glide-arium™ mesh enclosure: Each set will be checked prior to shipment to ensure a quality fit. Glider Nursery is not responsible for tears occurring from improper assembly of the frame. All orders are custom made, so please allow approximately 3 to 6 weeks for delivery.
Do you just want a Glide-arium™ mesh enclosure? Scroll down to order the Glide-arium™ mesh enclosure only.
Do you just want a Glide-arium™ mesh enclosure? Scroll down to order the Glide-arium™ mesh enclosure only.
Sorry, but Glider Nursery does not make frames for other types of mesh cages. Frames must be ordered at the same time as the Glide-arium™ mesh enclosure to ensure a proper fit.
Wheel Mount option: $10.00
We can make your Glide-arium™ mesh enclosure frame complete with a wheel mount. Wheel mounts are designed for pvc mounted wheels; does NOT work with Wodent™ wheels. Wheel mounts are NOT sold separately.
Wheel Mount option: $10.00
We can make your Glide-arium™ mesh enclosure frame complete with a wheel mount. Wheel mounts are designed for pvc mounted wheels; does NOT work with Wodent™ wheels. Wheel mounts are NOT sold separately.
Glide-ariums™ Mesh Enclosure
To place an order for the Glide-arium™ mesh enclosure ONLY (Frame NOT included):
Connectors
For those that wish to save money and build your own frame, connectors are now available. All frames, regardless of size will require eight 3-way corner connectors. Larger frames require at least four 4-ways. Connectors are for 1/2" PVC. If you are unsure of exactly what you need, or would like a different combination, please contact me prior to placing your order. You may need to purchase tees locally.
If you are building your frame for your new Glide-arium™ mesh enclosure, please do not build the frame until you have received your screen to ensure a quality fit.
If you are building your frame for your new Glide-arium™ mesh enclosure, please do not build the frame until you have received your screen to ensure a quality fit.
Shipping
Shipping charges are applied at the time of the order and apply for domestic shipping. If, for some reason you are not charged shipping for each Glide-arium™ mesh enclosure at the time of check-out, I will send an invoice upon completion of the order for the shipping charges. Items will be shipped upon payment of shipping fees.
Please be aware that international shipping charges can exceed $80.00 per Glide-arium™ and will be invoiced at the completion of the order. Items will ship upon payment of shipping fees. The buyer is responsible for any import fees imposed.
Please be aware that international shipping charges can exceed $80.00 per Glide-arium™ and will be invoiced at the completion of the order. Items will ship upon payment of shipping fees. The buyer is responsible for any import fees imposed.
Glide-arium™ Mesh Enclosure Instructions
Now that you have received your Glide-arium™ mesh enclosure, how do you put it together?
Click on: Glide-arium™ Mesh Enclosure Instructions
Click on: Glide-arium™ Mesh Enclosure Instructions
